ASV VT-70 High Output Posi-Track Loader
Get More Than You Ask For.
Quick Specs
Operating Weight
3465 kg
Tipping Load
3030 kg
Ground Pressure
4.5 psi
Engine Power
74.3 hp
High Output in Every Way.
The VT-70 High Output option is the best choice for lift-and-carry tasks—especially in construction, landscaping, and excavation applications.
Operators will experience a lift in productivity too. With the extended reach of the vertical lift and a high output hydraulic system, even big jobs seem small to the VT70.
POWER
The ASV VT-70 High Output features a turbocharged 74.3-horsepower Deutz diesel engine. The machine’s direct-drive pumps optimize performance (compared to belt-driven pump systems) allowing the machine to run attachments more efficiently than even higher-horsepower competitive units. Internal rollers prevent friction loss in the undercarriage, and since the undercarriage is separate from the chassis, you get greater pushing power, traction and efficiency.
PERFORMANCE
This machine’s robust hydraulic system allows for optimal performance and efficiency. Large line sizes, hydraulic coolers and direct-drive pumps enable operators to run a variety of demanding attachments more easily. Comparatively, the VT-70 High Output’s auxiliary hydraulic system optimizes power flow, while competing units can lose as much as 30 percent of their horsepower doing the same tasks.
COMFORT
The VT-70 High Output features a smooth ride from our patented Posi-Track system, improved ergonomics and air conditioning for maximum comfort. Plus, an optional air ride seat is available for additional comfort and a rearview camera and monitor boost safety and visibility.
SERVICEABILITY
Because your time is valuable, we built the VT-70 High Output with serviceability in mind. This machine is built with a three-panel hood arrangement that has two fold down side doors and a swing out radiator. You get easy access to your daily service points including the air filter, battery, and oil filter. The VT-70 High Output has a direct drive pump and boasts an industry-leading cooling package, so you can run hard without overheating day after day.
Standard Features Comparison
15 INCH TRACKS
| ASV VT-70 HO: |  |
| Bobcat T595: |  |
| Takeuchi TL8: | |
| Cat 259D: | |
TORSION AXLE SUSPENSION
| ASV VT-70 HO: | |
| Bobcat T595: | |
| Takeuchi TL8: | |
| Cat 259D: | |
ALL TERRAIN ALL SEASON TRACK
| ASV VT-70 HO: | |
| Bobcat T595: | |
| Takeuchi TL8: | |
| Cat 259D: | |
1043KG ROC COUNTERWEIGHT
| ASV VT-70 HO: | |
| Bobcat T595: | |
| Takeuchi TL8: | |
| Cat 259D: | |
MACHINE SPECIFICATIONS
OPERATIONS
| Loader Arms: | Vertical |
| Operating Weight: | 3645 kg |
| Rated Op Capacity @ 35%: | 1061 kg |
| Ground Pressure: | 31.0 kPa / 4.5 psi |
| Engine Power: | 55.4 kW / 74.3 hp |
| Tipping Load: | 3030 kg |
| Max Travel Speed: | 17.1 km/h |
ENGINE
| Features: | Deutz TCD 2.2 T4 Diesel, 3-Cylinder, Aftercooled, Turbocharged. |
| Cooling System: | Temperature-Controlled Variable Speed Hydraulically-Driven Fan and Coolant/Anti-Freeze-Filled Radiator. |
| Engine Power: | 55.4 kW / 74.3 hp |
| Displacement: | 2.2 L |
| Torque Peak: | 280 Nm |
| Intake Air Cleaner: | Dual Stage |
DRIVE TRAIN
| Track Type: | General Purpose Track Constructed of Rubber Compound with Embedded Co-Polymer Cords and All-Purpose Treads. |
| Drive System: | Two Hydrostatic Direct Drive Sprockets Controlled by a Single Joystick. |
| Track Drive Sprockets: | Elevated with Low-Friction, Replaceable Sprocket Rollers. |
| Undercarriage Suspension: | Two Independent Torsion Axles per Undercarriage. |
| Roller Wheels: | 24 High-Density Polyurethane and Rubber Wheels per Track, Wheels Include Sealed Bearings. |
| Front and Rear Wheels: | 355.6 mm |
| Middle Wheels: | 254 mm |
| Track Width: | 381 mm |
| Length of Track on Ground: | 1499 mm |
DIMENSIONS
| Full Length: | 3594 mm |
| Arm Up Height: | 3213 mm |
| Machine Height: | 2068 mm |
| Machine Width: | 1666 mm |
| Ground Clearance: | 330 mm |
AUXILIARY HYDRAULICS
| Controls: | Variable Flow via Joystick Rocker Switch, or Continuous via Console Switch. |
| Couplers: | Push-To-Connect Quick Couplers Mounted on Loader Arms, Pressure Relief Valve Mounted to Coupler Block. |
| Cooling System: | High Efficiency Side-By-Side Radiator and Oil Cooler. |
| Max System Pressure: | 22753 kPa |
| Auxiliary Pump Flow: | 86.7 lpm (Low Flow) / 105.6 lpm (High Flow) |
ELECTRICAL SYSTEM
| Wiring: | Pre-Wired for All Factory-Available Accessories. |
| Normal Charge: | 12 V |
| Battery: | 800 CCA |
| Alternator Charging System: | 120 Amp |
| Port Outlet (Inside Cab): | 1 – 12 V |
OPERATOR STATION
| Features: | Horn, Backup Alarm. |
| Loader Control: | Right-Hand Pilot Hydraulic Joystick Controls Loader Lift, Lower and Tilt, Plus Variable Control of Auxiliary Hydraulic. |
| Drive Control: | Left-Hand Pilot Hydraulic Joystick Controls Machine Speed and Direction. |
| Engine Speed: | Hand-operated Dial. |
| Multifunction Display / Indicator: | Engine RPM, Engine Coolant Temperature, Engine Oil Pressure, Hydraulic Oil Temperature, Battery Voltage, Hour Meter, Fuel Level, Trip Meter, Engine Diagnostics, System Monitoring, Fault Logging and More. |
| ROPS / FOPS: | Meets ISO 3471:2008 / Meets ISO 3449:2205, Level 1. |
| Illumination: | 2 Adjustable Forward-Facing Halogen Lights, 2 Adjustable Rear-Facing Halogen Lights, 1 Interior Light. |
SERVICE CAPACITY
| Fuel Tank: | 87.8 L |
| Hydraulic Tank: | 12.5 L |
| Engine Coolant: | 12.5 L |
| Engine Oil (inc Filter): | 8 L |
PLEASE NOTE: Specifications and inclusions noted above are indicative approximates only, may vary depending on machine and attachment configuration, and are subject to change without notice. Operating weights listed include 75kg operator, full fuel and hydraulic tanks, and a USA GP bucket – variations in buckets, attachments and operators will result in adjusted operating weights. Warranty terms and conditions apply; enquire at your local dealer for full details.
WARRANTY
ASV POSI-TRACK LOADERS NOW COME WITH THE BEST WARRANTY IN THE INDUSTRY.
From concept to creation, the machines we manufacture are some of the best in the business. They offer years of reliability, hard work and productivity—and we back that promise with an industry-leading warranty. The warranty includes 2 years/2,000 hours of coverage for the full machine including the tracks, plus the industry’s first no-derailment guarantee.
